Silica Sand

SILICA SAND

Antislip charges

Filler/charges designed to texture polyurethane or epoxy resins to achieve surfaces and floors with an anti-slip finish for pedestrian or vehicular traffic





MSDS, CERTIFICATES, APPROVALS...(link)

Uses

For application in the following situations:

  • aggregates for intermediate or final layer in anti-slip finishes of systems with walkable or vehicular requirements
  • to improve mechanical bondin in overlapping areas

NOTE: call our technical department about the application to other supports or situations

granulometry: 0,3 ~ 0,8 mm
density 265 g/cm³
molecular weight 60,1

GENERAL FEATURES

  • it is a mineral solid with no colored charges
  • use as paving mix systems with roughness requirements
  • suitable for anti-slip finishes, to be used in our waterproofing systems Desmopol and Tecnocoat, and for Tecnofloor and Tecnotop flooring systems.

PACKAGING

25 kg plastic bags

SHELF LIFE

12 months in original unopened containers and stored in a dry place at temperatures of 5~35 ºC (41 ºF to 95 ºF)

 

TECHNICAL DATA

PROPERTIES VALUES

density

265 g/cm³

SiO2%

approx.99%

grain shape

sub-angular

solubility in water

negligible

solubility in hydrofluoric acid

yes

molecular weight

60.1

Results performed in the laboratory at 23ºC and 50% RH, under controllable conditions. These values may vary depending on the application, climatology, or substrate conditions.