Swimming pools, fountains and water parks
DESMOPOL and TECNOCOAT continuous systems offer a perfect watertight finish with no joins or overlaps as well as complete adhesion to the surface. Easy application and an infinite range of finishes allow endless possibilities for the construction or renovation of swimming pools, fountains and water parks.
New build
1 Support preparation
Swimming pools, fountains, ponds etc. can be completed with a wide range of finishes on a variety of underlying surfaces (mortar, concrete, traditional waterproofing sheets, acrylic paints, ceramics and even wood…) using a few simple preparatory steps

A transversely deformable adhesive band, formed of a viscous-elastic layer coated on a nonwoven mesh. The nonwoven element allows adaptation to the support of the band and is highly recommended for specific applications of DESMOPOL liquid polyurethane and polyurea membrane.
más información
MASTIC PU is a single component polyurethane mastic that cures rapidly on contact with atmospheric moisture, forming a hard sealant, elastic and of a medium-high elasticity modulus. For sealing of vertical and horizontal joints.
más información2 Primer
A primer resin should first be applied to ensure adhesion.
.jpg)
PRIMER PU-1050 is a two-component, low viscosity 100% solid resin. It has been specifically designed to increase bonding and improve the surface leveling prior to the pure polyurea TECNOCOAT or DESMOPOL systems. It can be applied on porous substrates such as concrete or mortar
más información
PRIMER EPw-1070, is an epoxy water-based resin, without solvents, specially designed to increase adherence of our liquid waterproofing systems DESMOPOL and TECNOCOAT P-2049; also for the flooring systems TECNOFLOOR. PRIMER EPw-1070 has 0% volatile chemicals.
más información.jpg)
PRIMER PUc-1050, is a two-component, low viscosity, 100% solids polyurethane resin. It is specially designed to increase the adhesion of waterproofing systems, improve the rough floor in structural surfaces such as concrete or mortar, in waterproofing systems applications as TECNOCOAT pure polyurea or polyurethane DESMOPOL, and always in low ambient temperature conditions.
más información
3 Waterproofing membrane
The TECNOCOAT or DESMOPOL membrane will then be applied directly over the primer.

The 100% pure polyurea TECNOCOAT P-2049 has been developed as a sprayable and aromatic coating, suitable for waterproofing, protection, and sealing. It is made up of two high reactive liquid components, isocyanates and amines, which once mixed form an aromatic, continuous, seamless, high density, solid and elastic pure polyurea membrane. It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the UE 305/2011 regulation.
más información
The 100% pure and elastic polyurea TECNOCOAT P-2049 EL system was developed as a single coating suitable for waterproofing, protection, and sealing, especially in elements with structural movements. The pure polyurea TECNOCOAT P-2049 EL membrane is made up of two high reactive liquid components, isocyanates, and amines, which are mixed together using spray equipment. TECNOCOAT P-204 EL is an aromatic high density and elastic pure polyurea and excellent elasticity.
más información
DESMOPOL is a single component liquid made up from pure polyurethane, which once catalyzed forms a continuous elastic membrane, without any joints, overlapping or any integrated mesh needs. Its properties make it an excellent choice for achieving air-tightness and perfect waterproofing on a multitude of surfaces and substrates. It is applied manually, using a roller or brush and, exceptionally, using specific spray equipment.
It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the regulations UE305/2011, It has a European technical approval ETA 10/0121 and BBA 16/5340 (W3: working life 25 years, 1,2mm minimum thickness).
más información
DESMOPLUS is an additive that gives to the single component polyurethane membrane DESMOPOL/DESMOPOL CB several properties to facilitate its application in one layer without bubbles inside, improve their physical and mechanical properties, and gives a fast dry time. It is suitable for the application of the polyurethane membranes in low-temperature conditions or adverse weather conditions.
más información[product desmothix]
.jpg)
DESMOSOLVENT is a diluent for DESMOPOL polyurethane membrane and TECNOTOP aliphatic resin topcoat. The dilution is only recommended by spray application ("airless equipment"). Also could be used for tools and equipment cleaning.
más información4 CAPA DE ACABADO
As this is an aromatic membrane it will be necessary to protect it with a finishing coat. Depending on the desired appearance there are a number of available options: TECNOTOP 2CP, mosaic tiles, ceramics, etc.

TECNOTOP 2CP is a two-component aliphatic polyurethane resin for treatment, decoration, and protection of surfaces and areas in contact with chlorinated waters, even underwater for that is particularly suitable for the lining of pools, lakes or aquatic areas.
más información[product pigments]
Renovation
1 Support preparation
Swimming pools, fountains, ponds etc. needing renovation may present a variety of underlying surfaces (mortar, concrete, traditional waterproofing sheets, acrylic paints, ceramics and even wood…). Before applying our products a few simple preparatory steps should be taken.

A transversely deformable adhesive band, formed of a viscous-elastic layer coated on a nonwoven mesh. The nonwoven element allows adaptation to the support of the band and is highly recommended for specific applications of DESMOPOL liquid polyurethane and polyurea membrane.
más información
MASTIC PU is a single component polyurethane mastic that cures rapidly on contact with atmospheric moisture, forming a hard sealant, elastic and of a medium-high elasticity modulus. For sealing of vertical and horizontal joints.
más información2 Primer
A primer resin should first be applied to ensure adhesion.
.jpg)
PRIMER PU-1050 is a two-component, low viscosity 100% solid resin. It has been specifically designed to increase bonding and improve the surface leveling prior to the pure polyurea TECNOCOAT or DESMOPOL systems. It can be applied on porous substrates such as concrete or mortar
más información
PRIMER EPw-1070, is an epoxy water-based resin, without solvents, specially designed to increase adherence of our liquid waterproofing systems DESMOPOL and TECNOCOAT P-2049; also for the flooring systems TECNOFLOOR. PRIMER EPw-1070 has 0% volatile chemicals.
más información.jpg)
PRIMER PUc-1050, is a two-component, low viscosity, 100% solids polyurethane resin. It is specially designed to increase the adhesion of waterproofing systems, improve the rough floor in structural surfaces such as concrete or mortar, in waterproofing systems applications as TECNOCOAT pure polyurea or polyurethane DESMOPOL, and always in low ambient temperature conditions.
más información
3 Waterproofing membrane
The TECNOCOAT or DESMOPOL membrane will then be applied directly over the primer

The 100% pure polyurea TECNOCOAT P-2049 has been developed as a sprayable and aromatic coating, suitable for waterproofing, protection, and sealing. It is made up of two high reactive liquid components, isocyanates and amines, which once mixed form an aromatic, continuous, seamless, high density, solid and elastic pure polyurea membrane. It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the UE 305/2011 regulation.
más información
The 100% pure and elastic polyurea TECNOCOAT P-2049 EL system was developed as a single coating suitable for waterproofing, protection, and sealing, especially in elements with structural movements. The pure polyurea TECNOCOAT P-2049 EL membrane is made up of two high reactive liquid components, isocyanates, and amines, which are mixed together using spray equipment. TECNOCOAT P-204 EL is an aromatic high density and elastic pure polyurea and excellent elasticity.
más información
DESMOPOL is a single component liquid made up from pure polyurethane, which once catalyzed forms a continuous elastic membrane, without any joints, overlapping or any integrated mesh needs. Its properties make it an excellent choice for achieving air-tightness and perfect waterproofing on a multitude of surfaces and substrates. It is applied manually, using a roller or brush and, exceptionally, using specific spray equipment.
It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the regulations UE305/2011, It has a European technical approval ETA 10/0121 and BBA 16/5340 (W3: working life 25 years, 1,2mm minimum thickness).
más información
DESMOPLUS is an additive that gives to the single component polyurethane membrane DESMOPOL/DESMOPOL CB several properties to facilitate its application in one layer without bubbles inside, improve their physical and mechanical properties, and gives a fast dry time. It is suitable for the application of the polyurethane membranes in low-temperature conditions or adverse weather conditions.
más información[product desmothix]
.jpg)
DESMOSOLVENT is a diluent for DESMOPOL polyurethane membrane and TECNOTOP aliphatic resin topcoat. The dilution is only recommended by spray application ("airless equipment"). Also could be used for tools and equipment cleaning.
más información4 CAPA DE ACABADO
As this is an aromatic membrane it will be necessary to protect it with a finishing coat. Depending on the desired appearance there are a number of available options: TECNOTOP 2CP, mosaic tiles, ceramics, etc.

TECNOTOP 2CP is a two-component aliphatic polyurethane resin for treatment, decoration, and protection of surfaces and areas in contact with chlorinated waters, even underwater for that is particularly suitable for the lining of pools, lakes or aquatic areas.
más información[product pigments]